Bolt Design
Pellet Tin & Fill Probe Storage Case .177 .22 | 2 Tin + Air Arms Probe Magnetic Case with Crosshair Logo | UK Made
Pellet Tin & Fill Probe Storage Case .177 .22 | 2 Tin + Air Arms Probe Magnetic Case with Crosshair Logo | UK Made
Couldn't load pickup availability
Your pellets and your filling kit, together in one tidy case. This magnetic storage case holds two .177 pellet tins, or two of the smaller 250-count .22 tins, with a dedicated slot in the middle for your Air Arms quick-fill probe. No more digging around the bottom of your bag for the probe when it's time to top up.
It's built on our hidden-hinge pellet tin case, so the outside is smooth with nothing sticking out, four strong N52 magnets snap it shut, and our crosshair logo is inlaid into the lid. Tidy on the bench, easy to carry to the range, and a great gift for any Air Arms shooter.
Key Features
Tins and Fill Probe Together
- Recessed pockets for two pellet tins
- Shaped centre slot for an Air Arms quick-fill probe
- Everything you need for a session in one case
Hidden Hinge
- Hinge tucked away inside along the back edge
- Clean, smooth outside with nothing to snag
- Stainless steel hinge bolts for long-lasting strength
Strong Magnetic Closure
- Four N52 neodymium magnets, one in each corner
- Snaps shut with a satisfying click and stays shut in your bag
Self-Centring Lid
- Small tongue and groove at the front centre
- Lines the lid up perfectly every time it closes
Crosshair Logo Lid
- Crosshair inlaid flush into the lid, with a crisp recessed outline
- Printed right into the lid, so it won't peel or rub off like a sticker
- Black with orange, red or silk silver, or olive green with white
UK Made
- Designed and 3D printed by Bolt Design in the UK
Compatibility & Sizing
- Holds two .177 pellet tins, or two small .22 tins (250 pellets per tin)
- Fits tins up to 70mm in diameter and 23mm high
- Not suitable for the large 500-count .22 tins
- Probe slot fits the Air Arms quick-fill probe, with or without a BEST Fittings coupler fitted
Tin sizes can vary between brands, and third-party probes vary in shape, so if you're not sure, just drop us a message and we'll happily check for you. Don't need the probe slot? Our standard Pellet Tin Storage Case with Crosshair Logo is a little more compact.
What's Included
- 1 x Pellet Tin & Fill Probe Storage Case with Crosshair Logo in your chosen colours
(Pellet tins and fill probe shown for illustration only)
Specifications
- Material: PLA+ 2.0 polymer
- Capacity: 2 x .177 tins (or 2 x small 250-count .22 tins) and 1 x Air Arms quick-fill probe
- Max tin size: 70mm diameter, 23mm high
- Outer size: 180 x 88 x 31mm
- Weight: 139g
- Closure: 4 x N52 neodymium magnets
- Hinge: hidden, with stainless steel bolts
- Colour options: black/orange, black/red, black/silver, olive green/white
Delivery
£2.79 UK delivery
Free UK delivery on orders over £25
Quality & Care
This product is 3D printed using high-quality polymer. Minor layer lines may be visible as part of the manufacturing process. Avoid prolonged exposure to high heat, such as inside a vehicle on a hot day, as this may cause warping.
Share








